7.62 AK Triple Daeodon Front Panel

Will work wil Sig Spear 6.8/.277 magazines. 

This pouch is no different that our standard 7.62 mag pouch. While they have always fit 762x39 AK mags we do not think they are a perfect fit due to the obnoxious curve of the AK magazine and locking lug, we have never fully recomended them. The pouch works and we even run them personally but your mileage may vary and we do not guarentee a "perfect for everyone" fit.

The insert is made from kydex and is heat moldable if more or less tension on your AK magazine is desired as an end user modification.

The 7.62 AK triple Tall front panel comes with Tall inserts.

ESSTAC front panels do not come with the Female QASM buckles only the male buckles.

To use our front panels on different plate carriers that are out on the market make sure you have the 1" female buckles and they are spread 6" apart from the inside of the buckles. Also make sure your carrier has loop velcro under the buckles so our front panels can attach to your plate carrier that you have.

Front panels are removable via velcro(they act as the cumberbun flap) and two ITW QASM Buckles at the top. Simply pop the two buckles and swap panels. They are built the same as our normal Kywi pouches, but instead of Webbing on the back for mounting they have Hook velcro and two buckles to integrate into the PC.

Front panels remove some excess typical of Plate carriers, no longer do you need a mounting system and front flap. So you remove some weight and streamline/thin the front of your PC.

To use our front panels on different plate carriers that are out on the market make sure you have the 1" female buckles and they are spread 6" apart from the inside of the buckles. Also make sure your carrier has loop velcro under the buckles so our front panels can attach to your plate carrier that you have.

Front panels are removable via velcro(they act as the cumberbun flap) and two ITW QASM Buckles at the top. Simply pop the two buckles and swap panels. They are built the same as our normal Kywi pouches, but instead of Webbing on the back for mounting they have Hook velcro and two buckles to integrate into the PC.

Front panels remove some excess typical of Plate carriers, no longer do you need a mounting system and front flap. So you remove some weight and streamline/thin the front of your PC.